Ladders -> Personnel - Maintenance and Telescoping Lifts -> MRO Telescoping Hydraulic Maintenance Lifts
Ballymore - MRO Telescoping Hydraulic Maintenance Lifts
|
| Click image to see full size |
Overhead maintenance, repair and operating problems are solved with Ballymore's 2-worker MRO Telescoping Hydraulic Lifts. Helps maintenance workers get jobs done quickly and safely with easy mobility and high speed elevation. Choose from 4 manually propelled Ballymore models with working heights up to 34'.
Features:
• Rated capacity 500 lbs. / 2 person.
• Select from maximum platform heights of 15', 19', 24' or 28'.
• Roomy 28" x 36" platform accommodates 2 workers.
• Totally enclosed platform with 42" guard rails, midrails and gate, 4" toeboards and non-slip deck.
• Built-in ladder with flat, skid resistant treads and grab rails provides access to platform in fully lowered position.
• Rails fold for doorway passage and compact storage.
• Non-marking 8" casters for easy rolling and maneuverability.
• Self-storing outriggers extend from base to provide maximum stability.
• Leveling jacks secure unit to floor and compensate for uneven surfaces.
• Standard deep gray enamel finish.
• Meets or exceeds ANSI safety standards.
Hydraulic System Includes:
• Large diameter cylinder with chrome-plated ram and fluid restrictor.
• Low pressure system includes by-pass pressure valve to prevent overload.
• Check valve maintains platform elevation.
• Solenoid valve provides remote lowering.
• Base mounted lowering valve for safe descent in the event of a power failure.
Choose 1 of 3 available Power options:
• 120V AC : Convenient plug in operation.
• 12V DC: Independent deep cycle system complete with battery and charger for untethered mobility.
• Air Hydraulic Power: Requires 140 CFM @ 90 PSI.
Caution: Unless special provisions are made, platforms and lifts must not be used for energized bare wire electrical work, or operated on inclined surfaces. When this equipment is used, ground personnel should be excluded from the immediate work area. Compliance with unspecified codes should not be assumed. Electrical Note: Our standard electrical components are NEMA 1 or equivalent and are intended for indoor use in normal atmospheric conditions.
Features:
• Rated capacity 500 lbs. / 2 person.
• Select from maximum platform heights of 15', 19', 24' or 28'.
• Roomy 28" x 36" platform accommodates 2 workers.
• Totally enclosed platform with 42" guard rails, midrails and gate, 4" toeboards and non-slip deck.
• Built-in ladder with flat, skid resistant treads and grab rails provides access to platform in fully lowered position.
• Rails fold for doorway passage and compact storage.
• Non-marking 8" casters for easy rolling and maneuverability.
• Self-storing outriggers extend from base to provide maximum stability.
• Leveling jacks secure unit to floor and compensate for uneven surfaces.
• Standard deep gray enamel finish.
• Meets or exceeds ANSI safety standards.
Hydraulic System Includes:
• Large diameter cylinder with chrome-plated ram and fluid restrictor.
• Low pressure system includes by-pass pressure valve to prevent overload.
• Check valve maintains platform elevation.
• Solenoid valve provides remote lowering.
• Base mounted lowering valve for safe descent in the event of a power failure.
Choose 1 of 3 available Power options:
• 120V AC : Convenient plug in operation.
• 12V DC: Independent deep cycle system complete with battery and charger for untethered mobility.
• Air Hydraulic Power: Requires 140 CFM @ 90 PSI.
Caution: Unless special provisions are made, platforms and lifts must not be used for energized bare wire electrical work, or operated on inclined surfaces. When this equipment is used, ground personnel should be excluded from the immediate work area. Compliance with unspecified codes should not be assumed. Electrical Note: Our standard electrical components are NEMA 1 or equivalent and are intended for indoor use in normal atmospheric conditions.
*All Prices Subject to Change Without Notice. (Explanation)
| Ballymore MRO Telescoping Hydraulic Maintenance Lifts Part Details | |||||||
| Model No. | Platform Max. | Unit Minimum | Working Dimensions | Weight | Price Ea. | Rate Quote (?) | Purchase Online (?) |
| MR-15-AC | 15' | 6'-4" | 21' | 800 lbs. | $7364.40 |
|
|
| MR-15-DC | 15' | 6'-4" | 21' | 930 lbs. | $7590.00 |
|
|
| MR-15-AIR | 15' | 6'-4" | 21' | 950 lbs. | $8315.00 |
|
|
| MR-20-AC | 19'-3" | 6'-4" | 25' | 1000 lbs. | $9094.35 |
|
|
| MR-20-DC | 19'-3" | 6'-4" | 25' | 1130 lbs. | $9315.00 |
|
|
| MR-20-AIR | 19'-3" | 6'-4" | 25' | 1150 lbs. | $10045.35 |
|
|
| MR-24-AC | 23'-8" | 6'-7" | 30' | 1200 lbs. | $11046.00 |
|
|
| MR-24-DC | 23'-8" | 6'-7" | 30' | 1330 lbs. | $11271.00 |
|
|
| MR-24-AIR | 23'-8" | 6'-7" | 30' | 1350 lbs. | $11997.00 |
|
|
| MR-28-AC | 28' | 6'-10" | 34' | 1420 lbs. | $12779.00 |
|
|
| MR-28-DC | 28' | 6'-10" | 34' | 1550 lbs. | $13005.00 |
|
|
| MR-28-AIR | 28' | 6'-10" | 34' | 1570 lbs. | $13730.00 |
|
|
| F.O.B. PA. | |||||||
Optional items for Ballymore - MRO Telescoping Hydraulic Maintenance Lifts
MRO Telescoping Hydraulic Maintenance Lift Options
MRO Telescoping Hydraulic Maintenance Lift Options
| Ballymore MRO Telescoping Hydraulic Maintenance Lift Options Part Details | |||
| Model No. | Description | Price Ea. | |
| MR-TT | Optional Tool Tray | $100.70 | |
| MR-SOF | Optional Safety Orange Finish | $130.15 | |
| MR-FTH | Optional Fluorescent Tube Holder | $181.45 | |
| MR-PDR | Optional Platform Duplex Receptacle | $318.25 | |
| F.O.B. East Coast Warehouse | |||
